CAR AUDIO QUESTION! Quick Please?

Question

Ok here are the subs I have...
http://www.buy.com/prod/pioneer-premier-champion-ts-w1207d4-subwoofer-woofer-400w-rms-1200w/q/loc/111/208033814.html?dcaid=17988

Here's the amp I can get from a friend...
http://www.kenwoodusa.com/Car_Entertainment/Amplifiers/KAC-7204

My subs are each 400 watts rms and 1200 watts peak...

This amp that I can get for cheap is 1000 watts 2 channel kenwood... Here's the specs 250 Watts x 2 (2 ohm)/500 Watts x 1 (4 Ohm Bridged)... Can this amp support my subs?

Answer 1

it could but you would not be able to use its full potential.

Answer 2

Yes the amp will work, but you wont get the max out of the subs. If i read the specs. correctly you will only get about 125 watts to each sub in stereo mode. Unless you bridge them, they won't get good power, however it isn't stable to 2 ohms bridged so it will probably end up clipping and sounding like crap.

Answer 3

Yes it will run the speakers... But the power it will get depends on what ohms your speakers are...That is the first thing you need to find out...also, remember not to go by peak power, go by the rms. I think it will go alright together, especially if u can get a really good deal...Too many watts is wastefull for the subs. I'd get it