What amp is better, more power/reliability? Audioque 2200D vs Orion HCCA D5000 vs Cadence DCA-2500?

Question

Upgrading my Hifonics 2600 (stolen) for the best amp at 2500 w rms @ 1 ohm for my 2 12" re audio's. What is the best amp for the price?
Also i have a 200 amp h/o alternator and big 3 upgrade.
specs:

Audioque 2200d:
Digital Monoblock 1 ohm stable
Input Sensitivity 0.2v-8v
Variable Low Pass Filter 20Hz-200Hz @ 24dB/Oct
Subsonic Filter 10Hz-50Hz @ 24dB/Oct
Output Master / Input Slave, 2 amps linkable connection
Remote Level Control
Clipping Display Led
Signal to Noise Ratio 90dB
External Fuse Rating 200 Amps, 400 Amps Linked
Tested Voltage 14.4V
4 ohm power @ 12V @ 1% THD 500x 1
1 ohm power 2200 x 1
1 ohm Power @ 16V 2500 x 1
2 ohm Linked Power @ 14.4V @ 1% THD 4400 x 1
Dimensions 17.71"(L)x9.27"(W)x2.35"(H)

349$ shipped, 2500 w rms @ 16 volts.

Orion HCCA D5000:
5000W Class D Mono Amplifier
RMS @ 4 Ohm: 1 x 1000
RMS @ 2 Ohm: 1 x 1600
RMS @ 1 Ohm: 1 x 2500
Variable low-pass 30Hz to 250Hz
variable high-pass with INTELLi Q 20Hz to 150Hz
10dB of boost with INTELLi Q
Remote gain capable
Selectable AUX out
Dimentions: 22.8" x 10.2" x 2.4"
Power Rating: 1000 Watts RMS x 1 at 4 ohms
Signal to Noise Ratio: -59dBA (reference 1 watt into 4 ohms)
Additional Power Output: 2500 Watts RMS at 1 ohm
Massive loosely-regulated MOSFET power supply
IntelliQ Bass Optimization Circuit and Remote Gain Control
Heavy Gauge Direct-wire High Current Power and Speaker Terminals
18dB/octave Low-pass Filter
This unit is factory refurbished, 1 year warranty from us

440$ shipped, 2500 w rms

Cadence DCA-2500:
High Speed Mosfet Power Supply
Bi-Polar Japanese Sanken Output Devices
Double Sided Copper Rail PCB Architecture
24 dB Crossover Circuitry
Low Pass Crossover: 35Hz - 250Hz
Subsonic Filter: 10Hz - 50Hz
Bass Boost Equalization: 0-18db @ 45Hz
Lucite Encapsulated Large 2 and 4 Gauge Terminals
Dash Board Bass Remote
Dual-Amp Bridging for Double the Power @ 2 Ohms
Master/Slave Control
Adjustable Phase Control
Soft Start Mute & Delay
Tiffany Style RCA Line-In/Line-Out Jacks
24db Crossover Roll Off
Blue Edge-Lit Acrylic Side Panels and Light Bar

Specifications

4 Ohm RMS Power: 1 x 100 Watts @ 13.8 Volts
2 Ohm RMS Power: 1 x 1500 Watts @ 13.8 Volts
1 Ohm RMS Power: 1 x 2500 Watts @ 13.8 Volts
2 Amps Bridged: 1 x 5000 Watts
Frequency Response: 10Hz - 500Hz
S/N Ratio: >100 db
Damping Factor: >500 @ 100Hz
Minimum THD: <0.03%
Input Voltage: 200 mV - 6 Volt

495$ shipped.
Dimensions: 17" x 9.5" x 3.5"


what amp looks the best on paper? thanks

Answer 1

honestly, i would step up and get the audioque aq3500d. it is only about $50 higher than the cadence for a extra 1000 watts.

Answer 2

Blast it,so thieves from miles around flutter in like moths to a floodlight. Buy a shot gun and a whole lotta NoDoz.

Answer 3

Which RE's do you have? No to Audioque though.