PLZ NEED HELP CHOOSING LOUD SUBS?

Question

i dont know what subs to get plz help

(2) Pioneer TS-W3001D2
Features:

Woofer Cone Material: Interlaced Carbon Fiber/Glass Fiber Reinforced
Surround: Wide-Roll, 3-Layer Fiber Woven Ar amid Radial with Honeycomb Cloth
Voice Coil: Dual 4-Layer, Long Voice Coil
Voice Coil Wire: Copper
Voice Coil Bobbin: Phenol Resin Coated Glass Cloth
Projected Pole Yoke with Vented Pole
Magnet Construction: Double Stacked (110oz)
Basket Design: Aluminum Die-Cast Rigid Chassis
Gasket: 1-Piece Rubber
Wire Terminals: Integrated Single-Sided Silver Compression Terminals
Specifications:
Watts MAX. Music Power: 3000 Watts
Watts Nominal Power Handling: 1000 Watts
Frequency Response: 18 Hz to 700 Hz
Sensitivity: 89 dB
Ohm Rating: 2 ohm or 4 ohm
Recommended Enclosure: 0.50 ~ 1.0 Cubic Feet

(2) 15" Solo-Baric L7 Series Subwoofer
Max Power Handling: 2000 Watts
RMS Power Handling: 1000 Watts
High-temp Dual 2 Ohms voice coil (428 Fahrenheit)
Frequency response: 18-100 Hz
Sensitivity: 89.4 dB
Titanium deposit impregnated cone woofer with rolled outer edge
Santoprene rubber surround
Full coverage back bracing
Poly-cotton semi-progressive spider
Spiralead tinsel-lead technology
Highly-efficient UniPlate pole-piece/back plate
Heat-reducing T-cut top plate
Solid pole piece
Cast-aluminum basket
Spring loaded terminals
Solokon 1 piece cone
SoloKon for strength and accuracy
T cut top plate for high magnetic field strength
Aluminum coil former (same as SoloX)
Pole venting at cone brace
Stitched and glued tinsel leads enable high excursion
Ribbed Santoprene surround
One Piece Ultra Rigid Molded SoloKon with 360 Degrees Back Bracing

(1)18" Dual 4 Ohm Solo X Series Competition Subwoofer
Power Handling:
Peak: 10000 watts
RMS: 5000 watts
Impedance: Dual 4 ohm
SoloKon injection molded polypropylene with spoke design cone woofer
Stitched rubber surround
Cast-aluminum basket
Massive motor assembly
UniPlate V.2™ hyper-extended, pole/backplate assembly stays cooler with X-Vent™ technology (pat.pend.), yielding enhanced heat transfer for maximum power handling
S4 Quad Spider Array with perimeter cooling for improved air circulation
ARCTIC (Aluminum Rapid Cooling Thermal Induction Centering) Cap™ allows for even greater heat dissipation
Removable spring-loaded binding posts
3.5" Copper-clad-aluminum, edge-wound dual 4 ohms voice coil
Enormous magnet structure (approximately 100 pounds)
Frequency response: 18-100 Hz
Sensitivity: 90 dB


(1)JBL W12GTi-MkII 12" DVC
12" Dual 6 Ohm GTI Competition Level Subwoofer
Power Handling:
Peak: 4000 watts
RMS: 700 watts
Impedance: Dual 6 ohm
Kevlar paper cone woofer
Nitrile-butylene surround
Differential Drive® Design motor
Symmetrical field geometry ensure linear cone travel and low distortion
3" Voice coil
Frequency response: 18-1000 Hz
Sensitivity: 91 dB

(2) Memphis 15-MC124 12"
RMS Power Handling: 200 watts
Peak Power Handling: 400 watts
Double roll polyprene surround: Better control over cone movement
Ribbed polypropylene graphite cone
Dual flat spiders with graduated rolls
Single 4-ohm voice coil
4-layer winding on 2" Kapton® former
Vented basket and vented spider spacer
Aluminum heatsink
Sensitivity: 88 dB
Magnet Size: 50 oz.
Mounting Depth: 5.5"


I GOT THE 2 MEMPHIS AND THE 2 PIONEER SHOULD I SATY WITH ONE OF THEM OR SHOULD I BUY ONE OF THE OTHER ONES PLZ PLZ HELP

Answer 1

kid what are you talking about honestly??

number one what kind of amp do you have??



you have rms power ranging from 400-5k WTF??? to get a 2k rms amp that is semi decent u have to drop over 200$ ( i own an aq2200 cost me 250 used!!!!!)



number two what kind of trunk space do you have??

you going from dual 12" to 1 18" what the hell choose the right size you caant always fit an 18" and sometiems 2 12" will need too much space horizontal



number three



what the hell is your price range keep in mind u need

amp

woofer

box

wiring

fuses

and also possibly

performace alternator

extra batteries



i mean common give a price range



number 4

are you gonig for sql or spl



bc the pioneer wil sound better but most of those kickers will hit louder

and dont even look at that jbl crap

i would say memphis if you have the money for their higher end woofers



figure all that out and then come back to me and ill help you

Answer 2

This one is the best 15 inch subwoofer.



Kicker 08S15L74 Solo-Baric L7 15-Inch 380mm 4-Ohm DVC Subwoofer

Technical Details

- 15-inch Solo-Baric L7 subwoofer

- One-piece, injection-molded cone with full-coverage back bracing

- 1000 Watts RMS (2000 Watts peak) power handling with 4-ohm impedance

- 18-100 Hz frequency response

- One-year limited warranty

Answer 3

inktownlegend is right. You need to setup a budget, then find how much airspace you're willing to lose plus find out how much you want to spend on your electrical system. You have a long way to go so I suggest you get off of yahoo answers and do some MAJOR research.



better help could be had on the car audio forums.



http://www.caraudioclassifieds.org/forum/index.php

http://www.caraudio.com/

http://www.realmofexcursion.com/

http://www.soundsolutionsaudio.com/forum/

http://www.iasca.com/forums/forum.php <------------------This is where all the major cempetitors go to chat about car audio.

Answer 4

i would stay with memphis they r the best ones i have had and still have going on 4 years and no problems out of them but they hit hard and they r great 4 loud bass they survived through a bad car accident with a semi n a Cavalier

Answer 5

agree with beaner

your question is too broad



what are you trying to spend, $1000-$1500 or $3000-$5000

how much room do you have, truck, car or suv

do you already have an amp

are you willing to upgrade your entire charging system (the kicker setup is extreme)



first step is deciding your price range

second step is deciding your RMS wattage range

third step is choosing brands